SHC68U-68-EP – Shielded 68-conductor cable terminated with an
inverted VHDCI 68-pin male connector at one end and a 68-pin female
0.050 series D-type connector at the other. When using two E Series
DAQCard devices in adjacent slots, use one SHC68-68-EPM and
one SHC68U-68-EP.
0.5 m....................................................................................187406-0R5
1 m ......................................................................................187406-01
SH68-68-EP, SH68-68R1-EP – Shielded 68-conductor cable terminated
with two 68-pin female 0.050 series D-type connectors. They connect to
68-pin mass-terminated USB M Series, E Series, S Series, and B Series
devices. If you need a right-angle connector, use the SH68-68R1-EP.
SH68-68-EP
1 m ....................................................................................184749-01
2 m ....................................................................................184749-02
5 m ....................................................................................184749-05
10 m ..................................................................................184749-10
SH68-68R1-EP
1 m ....................................................................................187051-01
SH68-68-D1 – Shielded 68-conductor cable terminated with two
68-pin female 0.050 series D-type connectors. This cable connects
counter/timer and NI 670x analog output devices to 68-pin accessories.
1 m ......................................................................................183432-01
2 m ......................................................................................183432-02
SH6850 – A shielded cable that connects a 68-pin E Series, S Series
(except NI 6143), or B Series multifunction DAQ product to a third-party
or custom standard 50-pin accessory. The cable provides a
screw-latching 68-pin female connector on one side and a standard
50-pin female connector on the other side.
1 m ......................................................................................776784-01
2 m ......................................................................................776784-02
SHC68-68M-EPM – A shielded cable used to connect M Series devices
with custom-built accessories. One end ter
minates with a 68-pin VHDCI
male connector and the other with a 0.050 D-type male connector.
0.3 m....................................................................................192288-0R3
SHC68-NT-S – A shielded 68-conductor cable terminated with a
68-pin male VHDCI connector at one end and open to bare wires at
the other. The cable connects M Series, NI 6143, and R Series devices
to custom accessories through bare wires.
2 m ......................................................................................189041-02
RC68-68 – A 68-conductor ribbon cable that connects a DAQCard,
M Series device, or NI 6143 directly to 68-pin accessories. You can
use two RC68-68 cables together in adjacent PCMCIA slots or on
2-connector M Series devices.
0.25 m................................................................................187252-0R25
0.5 m....................................................................................187252-0R5
1 m ......................................................................................187252-01
R6868 – A low-cost, 68-conductor flat ribbon cable terminated with
two 68-pin connectors. Use this cable to connect a 68-pin E Series,
S Series (except NI 6143), or B Series multifunction DAQ device to
68-pin accessories.
1 m ......................................................................................182482-01
R6850 – Combines a 68F-50M cable adapter and a standard 50-pin cable
with female connectors on both ends. It is designed to adapt a 68-pin
E Series, S Series, or B Series multifunction DAQ device to a third-party
or custom 50-pin accessory.
1 m ......................................................................................776842-01
68-Pin Custom Cable Connector/Backshell Kit – A kit used to make
custom cables for devices with 68-pin SCSI 2 connectors. Solder-cup
contacts are available for soldering cable wires to the connector.
68-pin connector/backshell kit..............................................776832-01
Connector Blocks
SCC-68 – High-performance I/O terminal block for M Series and
E Series DAQ devices that provides four slots for analog input and digital
SCC signal conditioning modules, general-purpose breadboard areas, an
IC temperature sensor for cold-junction compensation, and 68 screw
terminals for dir
ect I/O connectivity.
SCC-68 ..................................................................................779475-01
Dimensions – 24.46 by 17.78 by 5.30 cm (9.63 by 7.0 by 2.09 in.)
DAQ Accessories and Cables
4
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
SH68-68-EP SH68-68-D1 SHC68-68M-EPM RC68-68 SCC-68 SCB-68